Electro Scanning Method (Harry Oldfield)
WHAT IS ESM SCANNING? ESM or Electro-Scanning Method is a quantitative numerical method of diagnosing imbalances in your energy field developed by British scientist Dr Harry Oldfield. For this procedure, I use a scanning meter combined with Electro-Crystal Therapy equipment to measure and record your energy field. It is a safe and non-invasive scanning method.
A subject is scanned with the Electro-Scanning Method or ESM. Harmless signals from the ElectroCrystal generator are induced into the body via the electrode which is held in the hand. The body’s energy field is boosted by these ‘signals’. The output signals from the patient are detected with a hand-held scanner to provide analytical information about the energy field. This information can indicate past, present and sometimes future problem zones in the energy field. A person trained in ESM scanning can then extrapolate useful information which can be analysed to deduce the most effective ways to rebalance the energy of the subject.
Electro-Scanning Method (ESM) Harry Oldfield then developed a technique that he called the Electro-Scanning Method, or ESM, after observing while working with Kirlian photography that sound and radio frequencies, as well as light, emanated from the subjects. He decided that there must be information about the subjects in these as well as in the light frequencies. By lowering the voltage and increasing the frequency, he was able to introduce recognizable signals into the whole body of a human or an animal (or certain other objects).
Measurements of the energy field taken at many locations enables the build-up of an image in three dimensions (and effectively real time), rather like the sonar image built up to show the ocean floor. Kirlian photography is limited to giving a two-dimensional view, but ESM is able to give 3D numerical information in decibel levels about a subject's energy field, both at the surface and at a short distance.
HOW CAN ESM SCANNING HELP YOU?
The readings of an ESM scan detect imbalances in your energy field. This allows an appropriate Electro-Crystal Therapy treatment to be devised to treat the imbalances. Frequently, ESM scans reveal energy changes that provide an advance warning of physical symptoms. This gives you the chance to rebalance your energy field before symptoms arise avoiding the development of an illness.
ESM scanning is a way of monitoring changes in your energy field following treatment and provides an indication of the effectiveness of the treatment.
WHAT HAPPENS DURING ESM SCANNING?
Prior to the ESM scan, I will ask you to remove any items that may interfere with the scan such as jewellery, metal objects, crystals, watches and glasses. Otherwise, you remain fully clothed.
I will then ask you to stand while you are scanned. If this is not comfortable, then I will scan you while you are seated or lying down.
I will then ask you to hold a crystal electrode which is connected to an Electro-Crystal Therapy machine. This machine then sends harmless signals through the tube which boost your energy field so that it can be measured using the scanning meter.
Based on the results of the scan, I will set up an appropriate Electro-Crystal Therapy treatment for you which will help to put your energy system back into balance.